Cisco 300-135 日本語版参考書に合格できる不可欠なツール

 

競争力が激しい社会において、IT仕事をする人は皆、我々JapanCertの300-135 日本語版参考書を通して自らの幸せを筑く建筑士になれます。我が社のCiscoの300-135 日本語版参考書習題を勉強して、最も良い結果を得ることができます。我々の300-135 日本語版参考書習題さえ利用すれば試験の成功まで近くなると考えられます。

今は時間がそんなに重要な社会でもっとも少ないお時間を使って試験に合格するのは一番よいだと思います。300-135 日本語版参考書が短期な訓練を提供し、一回に君の試験に合格させることができます。

300-135試験番号:300-135 リンクグローバル
試験科目:「Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)」
最近更新時間:2017-06-07
問題と解答:75

>> 300-135 リンクグローバル

 

NO.1 The implementations group has been using the test bed to do a 'proof-of-concept' that requires
both Client 1 and
Client 2 to access the WEB Server at 209.65.200.241. After several changes to the network
addressing, routing scheme, DHCP services, NTP services, layer 2 connectivity, FHRP services, and
device security, a trouble ticket has been opened indicating that Client 1 cannot ping the
209.65.200.241 address.
Use the supported commands to isolated the cause of this fault and answer the following questions.
On which device is the fault condition located?
A. R1
B. R2
C. DSW1
D. ASW1
E. R4
F. ASW2
G. R3
H. DSW2
Answer: D

300-135 最新な   300-135 更新   
Explanation:
port security needs is configured on ASW1.

NO.2 Scenario:
A customer network engineer has edited their OSPF network configuration and now your customer is
experiencing network issues. They have contacted you to resolve the issues and return the network
to full functionality.
The 6.6.0.0 subnets are not reachable from R4. how should the problem be resolved?
A. Apply access-list 46 in R6 to a different interface
B. Remove distribute-list 1 in ethernet 0/0 in R4
C. Remove distribute-list 1 in ethernet 0/1 in R4
D. Edit access-list 46 in R6 to permit all the 6.6.0.0 subnets
E. Remove distribute-list 64 out on R6
F. Apply access-list 1 as a distribute-list out under router ospf 100 in R4
Answer: E

300-135 教育   
Explanation:
Here we see from the running configuration of R6 that distribute list 64 is being used in the outbound
direction to all
OSPF neighbors.
However, no packets will match the 6.6.0.0 in this access list because the first line blocks all 6.0.0.0
networks, and since the 6.6.0.0 networks will also match the first line of this ACL, these OSPF
networks will not be advertised because they are first denied in the first line of the ACL.

NO.3 The implementation group has been using the test bed to do an IPv6 'proof-of-concept1. After
several changes to the network addressing and routing schemes, a trouble ticket has been opened
indicating that the loopback address on
R1 (2026::111:1) is not able to ping the loopback address on DSW2 (2026::102:1).
Use the supported commands to isolate the cause of this fault and answer the following question.
What is the solution to the fault condition?
A. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command.
B. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command.
C. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected
command.
D. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command.
Answer: C

300-135 教本   

NO.4 Which three features are benefits of using GRE tunnels in conjunction with IPsec for building
site-to-site VPNs?
(Choose three.)
A. supports multi-protocol (non-IP) traffic over the tunnel
B. reduces IPsec headers overhead since tunnel mode is used
C. allows dynamic routing over the tunnel
D. simplifies the ACL used in the crypto map
E. uses Virtual Tunnel Interface (VTI) to simplify the IPsec VPN configuration
Answer: A,C,D

300-135 関節   

JapanCertは最新の642-980問題集と高品質の200-150問題と回答を提供します。JapanCertのHPE6-A41 VCEテストエンジンと070-348試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の210-250 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/300-135.html